In Feburary 2016 29,
Follow the power cord to an outlet if the speakers aren't producing any sound, and confirm that they're plugged in. If they are, check that the cord is securely fitted into its socket in the speaker. Switch the plug to a different outlet to see if that solves the problem.
Look at the other parts of the system, such as the transmitter, to confirm they're also connected to a power source. If the power is on, switch out cables between the transmitter and the receiver, or connect the transmitter to a different sound source. If you're controlling the setting with a remote, replace the batteries with fresh ones to see if that makes a difference.
Adjust the settings on your sound system. The receiver may be set on mute or the sound may be turned down too low to hear. If only one speaker is silent, check that your balance control is set to provide sound to both speakers equally.
Change the position of your speakers. If your speakers operate in the 5.8-GHz band or use infrared technology to receive signals, they have to stay closer to the transmitter than a 2.4-GHz speaker. Infrared speakers also require line-of-sight positions to operate properly.
Bad Signal
Adjust the frequency controls on your system to a new setting, then tune the speakers to find a setting that provides a clear, strong signal.
Walk through your house and identify other radio sources in the 2.4-GHz range, if your wireless speakers work at that frequency. This is a standard range for devices such as cordless phones, cell phones and baby monitors, all of which can interfere with your signal, as can your microwave oven. See if turning the devices off while you're listening eliminates the interference.
Move the speakers closer to the transmitter. With less distance to travel, the signal degrades less. Less distance also reduces the chance of a barrier, such as a heavy metal appliance or a concrete wall, interfering with or distorting the signal.
Unsuccessful Pairing
Reconnect your Bluetooth device to the speaker adapter if you've recently deactivated Bluetooth on the device, because after Bluetooth is enabled, it won't reconnect with the speaker automatically. Go over the settings on your device and confirm they're set up to stream over Bluetooth. If your computer's Bluetooth is turned off, for example, nothing's going to happen.
Move your speakers closer to your device. Bluetooth's range is roughly 30 feet. If you have solid obstructions between the device and the speakers, remove them or reposition the system so that there are no obstacles in the signal's path.
Use the manufacturers' instructions to clear out the list of Bluetooth pairings on your device and speakers, then start over with the pairing process, repeating the steps you originally took to set up the wireless connection.
In Feburary 2016 29,
Showing posts with label position. Show all posts
Showing posts with label position. Show all posts
Monday, 29 February 2016
Friday, 19 February 2016
How to Create a HyperlinkIn Feburary 2016 19,
In Feburary 2016 19,
Open up the page to which you want to add the HTML link. Right-click on the file and select 'Open with.' Choose 'Notepad' or 'Wordpad.' This should open the HTML file in a text editor.
Find the place on the page where you want the hyperlink to appear. For example, if you want to position the link within a paragraph, locate the word in the paragraph that you want to turn into a hyperlink.
Decide where you want to direct the link. For example, let's say you want people to reach www.ehow.com when they click the link. Decide on the words you want to display for the link itself. For example, let's opt for 'How to do do just about everything.'
Add the following code at your chosen point: How'>http://www.ehow.com' rel='nofollow' rel='nofollow'>How to do do just about everything. . Replace the ehow link with your destination link and the text before the code with your preferred text. This is now a hyperlink.
Include only the page name and the forward slash for hyperlinks within your own site. For example, to link to a contact page for a site called www.yoursite.com, add in the appropriate part of your hyperlink. This will direct the user to http://www.yoursite.com/contact
Save your work and close the file. Upload the file to your host account using your chosen FTP (file transfer protocol) software. Try the hyperlink out live on your site to ensure it's working as intended.
In Feburary 2016 19,
Open up the page to which you want to add the HTML link. Right-click on the file and select 'Open with.' Choose 'Notepad' or 'Wordpad.' This should open the HTML file in a text editor.
Find the place on the page where you want the hyperlink to appear. For example, if you want to position the link within a paragraph, locate the word in the paragraph that you want to turn into a hyperlink.
Decide where you want to direct the link. For example, let's say you want people to reach www.ehow.com when they click the link. Decide on the words you want to display for the link itself. For example, let's opt for 'How to do do just about everything.'
Add the following code at your chosen point: How'>http://www.ehow.com' rel='nofollow' rel='nofollow'>How to do do just about everything. . Replace the ehow link with your destination link and the text before the code with your preferred text. This is now a hyperlink.
Include only the page name and the forward slash for hyperlinks within your own site. For example, to link to a contact page for a site called www.yoursite.com, add in the appropriate part of your hyperlink. This will direct the user to http://www.yoursite.com/contact
Save your work and close the file. Upload the file to your host account using your chosen FTP (file transfer protocol) software. Try the hyperlink out live on your site to ensure it's working as intended.
In Feburary 2016 19,
Subscribe to:
Comments (Atom)